We’re Hiring!
Join the Paintmaster Services Team Today!

We’re looking for talented bilingual painters and crew members to bring exceptional results to our region. Competitive pay and benefits, great team, and exciting projects await.

How to Compare Commercial Painting Bids Without Getting Burned on Quality

Share this post with your network:

You send out a commercial painting project to three contractors. The bids come back: $18,500, $21,000, and $11,800. Your instinct is to look at the $11,800 and wonder if the other two contractors are overcharging. Your facilities manager’s instinct is to take the middle bid as a compromise between high and low. Neither of these instincts is correct.

Commercial painting bids that vary by 35 to 60 percent for what appears to be the same project are not quoting the same project. They cannot be. The price difference reflects real differences in scope, preparation, products, and process. Understanding exactly where those differences live is the only way to compare bids accurately and make a decision that does not cost you significantly more money two to five years from now when the cheap job needs to be done again.

Why Commercial Painting Bids Vary So Much

Coat Count

The surface area is the same in every bid. The product from the paint manufacturer costs the same per gallon regardless of who buys it. Labor rates in the Tri-Cities market do not vary wildly enough to account for a 60 percent price difference between contractors bidding the same job. The variance lives elsewhere.

Preparation is the largest single variable. A contractor who pressure washes a commercial building and goes straight to paint is doing a fraction of the preparatory work of one who pressure washes, scrapes, sands, caulks every penetration, spot-primes, and ensures every surface is in condition to receive paint. That prep work takes time. Time is labor. Labor is cost. The contractor whose bid is 40 percent lower has almost certainly reduced or eliminated significant preparation steps.

Product specification is the second major variable. Premium commercial exterior products cost $60 to $90 per gallon and cover 350 to 400 square feet per gallon. Builder-grade commercial products cost $25 to $35 per gallon. On a large commercial building, the product cost difference across the full paint volume can account for thousands of dollars in bid variance. A contractor who specifies the more durable premium product has a higher materials cost that shows up in their bid.

Coat count is the third variable. One coat of paint applied over primed surfaces looks adequate for six to twelve months. Two properly applied finish coats achieve the coverage, depth of color, and film build that produces a finish rated for eight to twelve years. The difference in labor between one coat and two coats is roughly 40 percent of the total painting labor on the job. A bid that omits the second coat will be meaningfully lower and will produce a result that looks like a single coat within a year or two.

What a Properly Written Commercial Painting Bid Contains

A commercial painting bid that allows genuine comparison between contractors contains specific information about every variable that affects quality and long-term performance. A bid that does not contain this information is not a complete document and should be treated with appropriate skepticism.

Surface preparation steps, listed individually. Not just prep included or surfaces to be prepared but an enumerated list of exactly what preparatory work is included in the price. Pressure washing, scraping, sanding, caulking, filling, priming. Each step itemized.

Product specification by brand, product line, and product name. Not just premium paint or quality commercial products but Sherwin-Williams Duration Exterior in a specified sheen. Or Benjamin Moore Aura Exterior in two coats. The specific product determines the performance warranty and the expected lifespan of the coating in the specific climate.

Coat count per surface. How many coats of primer and how many coats of finish are included on each surface type? Walls, trim, doors, ceilings, and exterior surfaces may each have a different specification. This should be explicit, not implied.

Timeline with start and completion dates, scheduling approach (business hours vs after-hours), and any access requirements. For commercial properties where business operations cannot be disrupted, this section of the bid is as important as the financial terms.

Payment terms and warranty coverage. How much is due at signing, at project milestones, and at completion? What does the contractor stand behind and for how long?

How to Force an Apples-to-Apples Comparison

The most effective approach to getting comparable bids is to write a scope of work document before inviting contractors to bid. This document defines exactly what you are asking for rather than letting each contractor define the project for themselves. When every contractor bids against the same written scope, the price differences that remain reflect genuine differences in their cost structure, markup, and interpretation of the specified scope.

Your scope of work document should include: the surfaces to be painted identified by location and approximate square footage; the current condition of those surfaces; the product performance requirements if you have them (for example, a minimum ten-year exterior coating warranty); the scheduling requirements; any access constraints; and the required documentation on completion (color formulas, products used, coat count applied).

If you do not have the expertise to write this document yourself, ask your building facilities manager or consult with one of the contractors you are considering before formally inviting bids. A contractor who helps you define the scope before bidding is not at a disadvantage in the bid process. They are demonstrating the kind of collaborative approach that makes a good long-term contractor relationship.

The Low Bid Problem: Why the Cheapest Quote Costs the Most

A commercial painting project done correctly has a lifespan of eight to twelve years on exterior surfaces in the Tri-Cities climate. A project done with inadequate preparation and low-grade products has a lifespan of two to four years before visible failure begins and active maintenance is needed.

The math on this is unambiguous. A correctly done project at $20,000 that lasts ten years costs $2,000 per year amortized. A cheap project at $12,000 that needs significant remediation at year three and full repainting at year five costs $12,000 upfront plus $18,000 in repeat costs over the same ten-year window. Total cost: $30,000, versus $20,000 for the job done right the first time.

This calculation does not include the management cost of dealing with an early-failing paint job: the complaints from tenants, the additional inspections, the contractor negotiations, the scope discussions, and the disruption to business operations during a second paint project. The cheap bid is almost never actually the cheap bid when the total cost of ownership is calculated properly.

Red Flags in Commercial Painting Proposals

No site visit before bidding. Any contractor who bids a commercial painting project from a description or photographs rather than a site visit is either not accounting for conditions they have not seen or is planning to adjust the scope when they get on site. Site-specific factors that affect preparation requirements, product selection, and scheduling cannot be evaluated remotely.

Vague product language. References to quality paint or commercial-grade products without specifying brand and product line are not commitments. A contractor who will not specify the exact product they plan to use either has not decided yet or does not want to be held to a specification that would allow comparison.

No coat count disclosure. A bid that does not state how many coats of each product will be applied is leaving a major quality variable undefined. If the contract does not specify two coats and the contractor applies one, you have no contractual basis for requiring the second.

Pressure to sign immediately. A legitimate commercial painting contractor has a full schedule and does not need to pressure clients into signing today. Artificial urgency is a sales pressure tactic that substitutes for quality differentiation.

Cash-only payment requests or unusual upfront payment requirements. Professional commercial contractors operate through standard payment structures: a percentage at signing, progress payments at defined milestones, and final payment upon satisfactory completion. Unusual payment requests indicate either financial instability or an intent to under-deliver.

Questions to Ask Each Contractor Before Deciding

Beyond the bid document itself, a brief conversation with each contractor before making a selection reveals things that a written proposal cannot. Ask about their specific experience with commercial buildings similar to yours in the Tri-Cities. Ask how many people will be on the crew and who specifically will be supervising the project. Ask how they handle callbacks and quality disputes. Ask whether their crew are employees or subcontractors.

The answers matter less as a formal evaluation than as an impression of how a contractor thinks about their work and their client relationships. A contractor who answers these questions with specificity, confidence, and without defensiveness is demonstrating a professional posture that correlates with the quality of their output. A contractor who becomes evasive, vague, or impatient with these questions is showing you something useful about what the project relationship will look like.

Frequently Asked Questions

1. How many commercial painting bids should I get for a large project?


Three bids from licensed, insured contractors with commercial experience in the Tri-Cities is the standard approach for projects over $5,000. Three bids provide enough data to identify the market rate range and evaluate where each contractor’s scope and pricing sits within it. More than three bids creates administrative complexity without meaningfully improving the decision quality.

2.Is it acceptable to negotiate commercial painting bids?

Yes. Negotiation on scope, timeline, payment terms, and sometimes price is normal in commercial contracting. The most productive negotiations focus on clearly understanding what is and is not included in each bid rather than simply trying to get the price down. If a contractor’s price is higher because they include more preparation steps or a superior product, negotiating that out of the scope to match a lower bid is counterproductive.

3.What should I check before a commercial painting project starts?

Verify that the contractor’s license and insurance are current and that you have received a certificate of insurance naming your property as additional insured. Confirm the specific products to be used and have them specified in the contract. Confirm the project start date, timeline, and scheduling approach in writing. Identify a primary contact for the project on both sides. Establish how change orders will be documented and approved if scope changes are needed during the project.

4. What is a reasonable commercial painting warranty?

For fiber cement siding, which is the most common exterior material in new construction in this area, premium 100 percent acrylic exterior products are required. Sherwin-Williams Duration Exterior and Emerald Exterior are both appropriate choices with strong UV stability for Eastern Washington conditions. The critical additional step on fiber cement is sealing any field cut edges with a compatible primer before topcoat application.

What a Contract Should Specify Before You Sign

The proposal that wins the bid becomes the contract. Everything that is not in that contract is a potential dispute. Before signing any commercial painting contract in the Tri-Cities, confirm that the following elements are explicitly stated in the document: the complete scope of work by location and surface, the specific products by brand and product name, the coat count per surface, the start and completion dates, the scheduling approach (business hours vs after-hours), the payment structure, the warranty terms, the process for handling change orders and any additional work requested during the project, and the criteria for the final payment trigger.

A contract that is clear on all of these points eliminates the majority of commercial painting disputes before they occur. Disputes arise from ambiguity about what was promised, not typically from a contractor’s intentional failure to deliver. When the scope is explicit and the performance criteria are defined, both parties know exactly what is expected and what constitutes satisfactory completion.

Change orders deserve specific attention in commercial painting projects. Building conditions discovered during preparation, substrate issues not visible during the estimate, tenant or owner-requested scope additions all create change order situations. The contract should specify that all changes to the original scope require written documentation with an agreed additional cost before the changed work proceeds. Verbal change order agreements are unenforceable and are the source of most post-project billing disputes in commercial construction.

Contact Us

"*" indicates required fields

Name*

More To Explore

We create vibrant and inviting spaces.

Everyone loves to have a beautifully painted home that is not only warm and inviting but lasts.

We create inviting spaces that will elevate your place of business or building with quality painting services.

We take pride in the workmanship that is put into every job and stand behind our work without exception.